When the rain wins, we pull the water back out.
A heavy storm that overwhelms your drains or fails your sump pump can put inches of water into a finished basement fast. We extract it, dry the structure to a number, and treat it — before the storm cleanup turns into a mold problem.
The water leaves. The moisture in the walls stays.
When rain overwhelms the drains or the sump pump gives out, the water pours in fast — and a finished basement soaks it up just as fast. Drywall wicks it upward, insulation holds it, and the subfloor swells. Pumping out the standing water is only the visible half; the moisture driven into the structure is what does the lasting damage.
And it has a deadline. Given warmth and moisture, mold can start within about 48 hours — so the race isn't just to remove the water, it's to dry the structure before it turns. We extract fast with truck-mount units, then dry to a measured standard with commercial dehumidifiers, tracked on a daily moisture log so 'dry' is proven, not guessed.
Where storm flooding hides after the water's gone.
Pumping out the visible water isn't the same as drying the structure. These are the signs moisture is still in the building.
A tide line on the drywall
A visible line where the water peaked means the drywall above it may look dry while it wicked moisture upward behind the surface.
A musty smell that won't clear
A persistent damp, earthy odor after cleanup means moisture is still trapped in the structure — the first sign mold is starting.
Buckled flooring or swollen baseboards
Warped laminate, cupped wood, or baseboards pulling from the wall mean water got underneath and is still in the subfloor.
Cool, damp walls days later
A wall that still feels cool and damp to the touch days after the flood has moisture inside it that needs real drying, not just fans.
Extract it, dry it, treat it, restore it.
Our own crews handle emergency mitigation start to finish. For rebuilds, we manage every trade under one accountable team. We manage extraction, drying, and rebuild so a flooded basement is dried correctly, not just pumped out.
We extract the water fast
Truck-mount extraction pulls the standing water quickly so a storm flood doesn't keep soaking deeper into floors and walls. The sooner it's out, the more we save.
We find the moisture you can't see
Moisture meters and thermal imaging map where the water wicked into drywall, insulation, and subfloor — so we dry the whole affected area, not just the floor that looks wet.
We dry it to a number and treat it
Commercial dehumidifiers and air movers dry the structure to a measured standard, tracked on a daily moisture log, and we apply antimicrobial so mold never gets its 48-hour head start.
We document it and rebuild
We photograph and scope the loss for your insurer, then TRC manages drywall, flooring, and finishes on one schedule. Our own crews handle emergency mitigation start to finish. For rebuilds, we manage every trade under one accountable team.
Storm flooding questions, honestly answered.
It depends on where the water came from, and the distinction matters a great deal. Water that backs up because rain overwhelmed your drains or your sump pump failed may be covered — sometimes under a specific backup or sump endorsement — while rising water from outside ('flood') generally needs separate flood coverage. We document the source carefully because that's what decides your claim.
Immediately. Water keeps soaking deeper every hour, and mold can start within about 48 hours in a warm, wet space. Pull the plug on any submerged electronics if it's safe, get people out of standing water near outlets, and call — we keep extraction gear staged in Limerick so the truck is already loaded.
No — that's the most common and costly mistake. Removing the standing water leaves the moisture driven into drywall, insulation, and subfloor behind, and that's exactly what grows mold. We dry the structure to a measured standard and prove it with a moisture log, rather than assuming a pumped-out room is a dry one.
Often, if drying starts early. Drywall and flooring dried quickly may not need replacing, while the same materials left wet for days usually do. The longer the water and moisture sit, the more comes out — which is why the first call matters so much.
It can be. Storm water that backs up through drains or comes in from outside can carry contaminants, so we treat it as potentially unsanitary — extracting it, disposing of unsalvageable materials safely, and applying antimicrobial as we dry. We'll tell you honestly what can be saved and what can't.
More on storm damage restoration.
Restoring Your Life Back To The Way It Should Be.
Every hour the water sits, the mold clock runs.
Your call rings straight to our own team, 24/7 — a real person answers, not a machine. No call centers, no franchise dispatch.